Garrett Pro-Pointer AT Z-Lynk | DTI Special

185,00 € * 205,00 € * (9,76% gespart)

inkl. MwSt. zzgl. Versandkosten

Versandkostenfreie Lieferung!

Sofort versandfertig, Lieferzeit ca. 1-3 Werktage

  • D9
Pinpointer Pro-Pointer AT Z-Lynk | DTI Special mit Fundtasche und Buch! Pinpointer Set! Das... mehr
Produktinformationen "Garrett Pro-Pointer AT Z-Lynk | DTI Special"

Pinpointer Pro-Pointer AT Z-Lynk | DTI Special mit Fundtasche und Buch!

Pinpointer Set! Das DTI Marken-Metalldetektor Paket enthält den Pro-Pointer AT Z-Lynk, die Garrett Fundtasche und das DTI "Handbuch für Schatzsucher". PinPointer sind unentbehrliche Helfer für Sondengänger, da sie wertvolle Bodenfunde wie Münzen, Schmuck, Relikte, Fibeln und andere Edelmetalle vor groben Kratzern und Beschädigungen durch Grabungswerkzeuge durch Ihre finale punktgenaue Ortung schützen. Unter Sondengängern ist die "Möhre" die erste Wahl. Sie schwören auf den wasserdichten PinPointer mit der Top Tiefenleistung!

Der PinPointer ProPointer AT Z-Lynk ist mit dem MS-3 Kopfhörer rasch verbunden und einsetzbar. (Funkkopfhörer). Z-Lynk ist sechs mal schneller als Bluetooth! Alternativ voll kompatibel mit dem Garrett WR-1 Z-Lynk. 

Fundtasche  |  Die Garrett "Camo Diggers Pouch" Fundtasche ist eine praktische und bequeme Fundtasche für Sondengänger mit Garrett Logo. Im Tarnmuster. Der Hüftgurt ist größenverstellbar. Eine ideale Aufbewahrungstasche mit einer Höhe von 30 cm und einer Breite von 25 cm für Ihre Funde und Zubehör.  

BUCH FÜR SCHATZSUCHER | Als Schatzsucher und Sondengänger auf die Suche nach Schätzen aus längst vergangenen Zeiten zu gehen, ist sehr spannend. Wo gibt es Fundstücke, die vergraben, eingemauert oder versunken sind? Es gibt allerdings auch Rechtliches zu beachten. Und wie arbeite ich die Fundstücke auf? Wie restauriere und konserviere ich die Bodenfunde? Das Buch gibt eine Einführung in das Hobby des Schatzsuchers!

 |  PinPointer für Taucher
 |  PinPointer für alle Einsatzgebiete

Siehe auch ProPointer AT » GARRETT PRO-POINTER AT

 

Wasserfest

Der PinPointer ist wasserfest bis zu 6 m nach IP68. (Schutzklasse International Protection 68! Dicht gegen Staub und Berührung. Wasserdicht, denn Schutz gegen Eindringen von Wasser bei dauerhaftem und kompletten Untertauchen in Wasser ist gegeben.) Der Pro-Pointer ist unter Wasser auffällig sichtbar und gut zu erkennen durch das orange Gehäusefarbe. 

 garrett-pro-pointer-at-z-lynk

Besondere Eigenschaften des Pro-Pointer AT Z-Lynk

  • Ton- und Vibrationsalarm erhöht sich automatisch beim Annähern an das Metallobjekt auch bei starkmineralisierten Böden, Salzwasser und anderen anspruchsvollen Umgebungen
  • Punktortung mit der Gerätespitze
  • 360° Rundumdetektion
  • LED Licht zum Gebrauch an lichtschwachen Stellen
  • Kratzkante zur Durchsuchung fester Bodenbestandteile
  • automatischer Abgleich
  • schnelle Neuabstimmung
  • einstellbare Empfindlichkeit
  • Ton / Vibration, ohne Ton mit Vibration einstellbar
  • automatische Abschaltung
  • Tiefenmarkierung in cm / inch
  • Befestigungsmöglichkeit
  • LostPin Pointeralarm nach 5 Minuten

Technische Spezifikationen

  • Betriebstemperatur: - 20°C bis 54°C (-4°F to 130°F)
  • Wasserfest bis zu 6 m (20 ft.), (IP68)
  • Arbeitsfrequenz: 11,5 kHz
  • Bedientasten: EIN / AUS Druckknopf
  • in 3 Stufen verstellbare Empfindlichkeit
  • Länge: 22,9 cm, Breite: 3,8 cm bis zu 2,2 cm spitzzulaufend
  • Gewicht: 0,2 kg mit Batterie
  • 1 x 9 Volt Batterie (inkl.)

Lieferumfang DTI Special

  • PRO POINTER AT Z-LYNK Elektronikeinheit
  • Holster (Gürtelhalter)
  • 9 Volt Blockbatterie
  • Anleitung in Deutsch, Englisch, Französisch, Spanisch
  • Special: Garrett Camo Fundtasche

Schauen Sie auch unsere Special Prices ...

special-price-metalldetektor-shop

 3 Jahre Garantie
dti-3-jahre-garantie

 

Überblick » Pinpointer 

Pinpointer von » Garrett | » Fisher | » Quest | » Minelab | » Nokta | Makro | » XP

Metalldetektor Einsatzgebiete » Einsteiger | » Fortgeschrittene | » Profis | » Goldsucher | » Taucher | » Archäologen | » Kinder | » Strandsucher | » Tiefensucher

 

» Garrett Pro-Pointer AT Z-Lynk Datenblatt Das Datenblatt der Pro-Pointer AT Z-Lynk in... mehr

» Garrett Pro-Pointer AT Z-Lynk Datenblatt

Das Datenblatt der Pro-Pointer AT Z-Lynk in englischer Sprache beinhaltet die technischen Spezifikationen, Produktbeschreibung und -auszeichnung, Zubehör, ...

» Garrett Pro-Pointer AT Z-Lynk Bedienungsanleitung

Die Bedienungsanleitung des Garrett Pro-Pointer AT in englischer Sprache beinhaltet die besonderen Eigenschaften, Inbetriebnahme, Empfindlichkeitseinstellungen, Funkoptionen, "Fast Retune" Einstellung, "Lost PinPointer Alarm", Lieferumfang, Tipps & Tricks, ...

» Vergleichstabelle zwischen Garrett Pro-Pointer AT Z-Lynk, Pro-Pointer AT und Pro-Pointer 2

Vergleichstabelle zwischen dem  Garrett ProPointer AT Z-Lynk, ProPointer AT und ProPointer 2 in Bezug auf technische Eigenschaften und Funktionen.

Features ON/OFF, Retune, Adjust Button Pinpointing Tip 360° Side-Scan Area Exclusive... mehr

Features

  • ON/OFF, Retune, Adjust Button
  • Pinpointing Tip
  • 360° Side-Scan Area
  • Exclusive Scraping Blade LED Flashlight
  • Waterproof Speaker
  • Lanyard Attachment Loop
  • Sealed Battery Cover
  • Ruler in Inches and Centimeters
  • Internal Wireless Transmitter

propointer-at-z-lynk-freigestellt

Powering On

Press and release the button while holding the detector away from any metallic objects. You will hear 2 beeps and the LED will remain on.

Powering Off

Press and hold the button for a half second until you hear a single beep (or single vibration in Silent Mode), indicating power down.

Changing Settings

The Pro-Pointer AT Z-Lynk has three Sensitivity settings and two detection settings: Audio-plus-Vibrate or Vibrate-only (silent). To enter adjustment mode, press and hold the button for 2 seconds—indicated by a single beep followed by a dual-tone beep and flashing LED.  (Note: In Silent Mode, beeps are replaced by vibration pulses.) The first button press after entering adjustment mode indicates the current setting. Repeatedly press the button to cycle through the 6 settings:

1 beep    =  minimum Sensitivity, with audio
2 beeps  =  medium Sensitivity, with audio (Default) 3 beeps = maximum Sensitivity, with audio
1 vibrate  =  minimum Sensitivity/Silent
2 vibrate  =  medium Sensitivity/Silent
3 vibrate  =  maximum Sensitivity/Silent

To exit adjustment mode, press and hold the button for 2 seconds—indicated by a dual-tone beep (dual vibrate in Silent Mode), or wait 5 seconds for automatic exit.

Notes:

Lower Sensitivity settings are recommended to prevent detection of highly mineralized grounds.

Detection remains operable during the adjustment mode.

Settings will be remembered when the unit is switched off and back on.

Wireless Operation

Reconnecting:  Once paired, the pinpointer will instantly reconnect to the last paired receiver. The receiver must be powered on first. The pinpointer’s external audio will switch off when paired.

Pairing: This product can be be paired wirelessly with any Garrett Z-Lynk receiver using the following steps.

  1. First, switch on the receiver (i.e. Garrett MS-3 Wireless Headphones or  Garrett WR-1 Z-Lynk device).
  2. Hold the pinpointer within 6 inches (15cm) of the headphone or the WR-1 device.
  3. Switch the pinpointer on and wait (approximately 3 seconds) for the light on the headphones (or WR-1) to go from blinking to steady.
  4. If the units do not pair, switch the pinpointer off and then on again. Note: If you have trouble pairing, make sure that the receiver is on first,  and that the two devices are within six inches of each other. Also, be sure that a previously paired headphone or WR-1 is not powered on in  the vicinity (20 to 50 feet).

Fast Retune for Mineralized Ground

To tune out the detection of saltwater, wet sand or highly mineralized ground, hold the tip of the Pro-Pointer AT Z-Lynk to the water, sand or soil and quick-press the button for an instant Retune.

If necessary, repeat this Fast Retune to further eliminate any environmental response. Note: An alternate means of eliminating the ground response is to reduce Sensitivity.

Precisely Pinpointing Large Targets

Slowly scan toward the object until the response increases to full/constant alarm. Then quick-press the button to instantly retune and narrow the detection field. Continue scanning toward the object to find its precise location. Repeat this Fast Retune to further narrow detection field as needed.

Lost Pinpointer Alarm

After 5 minutes of being ON without a button press, the Pro-Pointer AT Z-Lynk will begin emitting progressively faster warning chirps for 60 minutes. Press the power button to reset.

Auto-Off Feature

After one hour of warning chirps, the Pro-Pointer AT Z-Lynk will power off automatically.

Scraping Blade

This rugged edge is ideal for sifting through dirt while searching for the target. The Pro-Pointer AT’s 360º-side-scan detection allows the detector to alarm when the blade is passed in close proximity to a metallic target.

Lanyard Attachment Clip

Use to attach the Pro-Pointer AT to your belt, digging pouch or your detector (if desired).

Holster

Secure to any standard size belt. A metal snap within the holster will cause the pinpointer to alarm if put away while powered on.

Ruler

The Pro-Pointer AT has a ruler molded into its exterior to measure a target’s depth in either centimeters or inches.

Low Battery Alarm

When the battery becomes low, the detector will sound an alternating dual-tone alarm. Replace the 9V battery as soon as possible.

Operational Information and Tips

  • Operation is completely automatic. All metals will be detected including ferrous and non-ferrous.
  • When a target is detected, the Pro-Pointer AT Z-Lynk will produce an audio and/or vibration alert. The rate of the pulsing audio and vibrations increase proportionately as the pinpointer is moved  closer  to a metallic target.
  • Maximum detection of very small targets is obtained against the side  about ½” from the tip.
  • To avoid cancelling out a target, do not turn on the Pro-Pointer AT while  it is adjacent to the target.
  • Because the Pro-Pointer AT is a static, non-motion detector, optimum  operation is achieved when the unit is switched off between uses.
  • Avoid using the Pro-Pointer AT as a digging or prying tool. It is designed for flat side-scanning and precise pinpointing with its tip. It is not intended to be used with excessive force.
  • For water use, do not exceed 20 feet (6 meters) depth. Make sure the battery cap threads are free of sand, sediment, etc. and that O-ring is periodically lubricated with silicone grease to maintain a tight seal.
  • Radio signals do not transmit through water, so if you will be hunting fully  submerged, you must rely upon the Pro-Pointer’s vibration and audio alerts without the benefit of headphones.
Bewertungen lesen, schreiben und diskutieren... mehr
Kundenbewertungen für "Garrett Pro-Pointer AT Z-Lynk | DTI Special"
Bewertung schreiben
Bewertungen werden nach Überprüfung freigeschaltet.

Die mit einem * markierten Felder sind Pflichtfelder.

Ich habe die Datenschutzbestimmungen zur Kenntnis genommen.

TIPP!
TIPP!
Garrett Ace Apex | VLF Sondel Metalldetektor für Einsteiger, Fortgeschrittene und Profis Garrett ACE APEX™
ab 539,00 € *
DTI Special ProPointer 2 Garrett Pro-Pointer 2 | DTI Special
145,00 € * 165,00 € *
Leichte Gebrauchsspuren Garrett ATX Leichte Gebrauchsspuren Garrett ATX
1.679,00 € * 2.799,00 € *
Minelab Equinox 900 Minelab Equinox 900
1.249,00 € *
Minelab SDC 2300 Metalldetektor Minelab SDC 2300
3.849,00 € *